ADB-51 Analog Divider Module
Accepts 2 mADC or VDC inputs and provides one mADC or VDC Output
Divides input A by Input B to Equal Output C
K (A/B) = C
Typical Applications are Air Fuel Ratio Control and Temperature Compensation of Flow
Click here to view Data Sheet for Model ADB-51
Click here for printer-friendly version
Click here for Instruction Manual
|
ADM-20 Amplitude Discriminator Module
Also known as a High Low Selector
Accepts 4 mADC or VDC inputs and provides one mADC or VDC Output
The Output is Equal to either the Highest or Lowest of the Inputs
Click here to view Data Sheet for Model ADM-20
Click here for printer-friendly version
Click here for Instruction Manual
|
AIM-37 Analog Integrator Module
Accepts one mADC or VDC Input and provides one mADC or VDC Output
Output is the integrated or averaged value of the input
Integral or Average Time Periods can be from 1 Second to 2 Hours
Output is updated at the end of each time period.
Time Period can be controlled by an External Contact
Click here to view Data Sheet for AIM-37
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
ALM-00 Analog Linearizer Module
Accepts one mADC or VDC Input and provides one mADC or VDC Output
Offers Monotonic, Logrithmic and Break Point Linearization
Power Exponents from 0.2 to 5.0
Log or AntiLog Conversion
Up to 10 Break Point Linearization
Click here to view Data Sheet for ALM-00
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
ARB-96 Adjustable Ramp Buffer
Accepts one mADC or VDC Input and provides one mADC or VDC Output
The rate of change of the output is limited by a preset time
Up and down rate can be individually set
Rate Change limit from 0.1 Second to 50 Days
Click here to view Data Sheet for ARB-96
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
ASM-54 Adder/Subtractor Module
Accepts 4 mADC or VDC Input and provides one mADC or VDC Output
+/-KaA +/-KbB +/- KcC +/- KdD = Output
The K Coefficient is adjustable from 0-1.25
Input Loss is Treated as Zero, not a Negative
Click here to view Data Sheet for ASM-54
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
AXB-53 Analog Multiplier Module
Accepts Two mADC or VDC Input and provides one mADC or VDC Output
Multiples Input 1 Times Input 2
K AB = C
Click here for AXB-53 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
FSM-55 Frequency Scaling Module
Converts Various Pulse rates to a standard pulse rate output
Accepts Sine, Square Wave or Contact Closure inputs
300mV to 30V P-P
DC- 20 kHz.
Output Pulse width of 24 VDC, 50mSec Standard
Click here for FSM-55 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
LLM-64 Lead / Lag Module
Provides a Phase Lead or Lag between the input and output
Gain Factor up to 10
Lead Lag Range from 1 second to 50 hours
Standard mADC and VDC inputs and outputs
Click here for LLM-64 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
MDB-52 Analog Multiplier/Divider Module
Multiply/Divide Module
Accepts up to 3 inputs
Performs multiply/divide, multiply, divide, square root, and the square root of ratio or product
Standard mADC and VDC inputs and Outputs
Click here for MDB-52 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
PAM-59 Pulse Accumulating Module
Pulse Accumulating Module
Sine or Square Wave 9-24V pulse inputs
DC to 20kHz input range
Standard Voltage and Current Outputs
Click here for PAM-59 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
PSM-57 Pulse Summing Module
Pulse Summing Module
Adds or Subtracts up to 4 inputs
Sine Wave, Square Wave or Contact Closure Inputs
DC to 20 kHz.
24 VDC Pulse Output, 50mSec Nominal Pulse width
Click here for PSM-57 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
RBM-98 Ratio Bias Module
Ratio Range of K = 0.1 to 10.0
Input Bias Range 0 to +/- 100%
Input and Outputs of DC Current and Voltage
Absolute Temperature and Pressure Compensation
Click here to view Data Sheet for RBM-98
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
SHM-60 Sample and Hold Module
Sample and Hold Module
Four Memory Functions of Sample, Track, Peak and Valley
Infinite Hold Time
Command Control 24VDC @2mADC or VDC Signal
Click here to view Data Sheet for SHM-60
Click here for printer-friendly Data Sheet
Click here for Instruction Manual
|
SLM-62 Signal Limiter Module
Signal Limiter Function
Independent Full High and Low Inputs
Limits the Output to the High and Low Set Value
VDC and MADC Inputs and Outputs
Click here for SLM-62 Data Sheet
Click here for printer- friendly version
Click here for Instruction Manual
|
SRT-30 Square Root Transmitter
Linearize Outputs from Orifice Plates
Dynamic Range of 1-100%
Adjustable Dropout of 1-20%
VDC and mADC Inputs and Outputs
Click here for SRT-30 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
UDB-97 Up-Down Ramp Buffer
Simulates Manual Output Station
Soft Start and Shutdown
Contact Inputs
Ramp Control 0.1 Second to 50 Hours
Click here for UDB-97 Data Sheet
Click here for printer-friendly version
Click here for Instruction Manual
|
|